Siemens SITRANS LG250 Operating Instructions Manual

Also see for SITRANS LG250: Operating instructions Operating instructions Operating instructions Operating instructions

38 PBD-51041048SITRANS LG250 - Operating Instructions44277-EN-200212The following reset functions are available:Delivery status: Restores the parameter settings at the time of ship-ment from the factory, incl. order-specific settings. Any stored falsesignal suppression or user-programmed linearisation curve, as wellas the measured value memory, are deleted.Basic settings: Restores the parameter settings, incl. special param-eters, to the default values of the respective instrument. Any storedfalse signal suppression or user-programmed linearisation curve, aswell as the measured value memory, are deleted.The following table shows the default values of the instrument. De-pending on the instrument version or application, all menu items maynot be available or some may be differently assigned:Menu - SetupMenu item Default valueLock adjustment ReleasedMeasurement loop name SensorUnits Distance unit: order-specificTemperature unit: order-specificProbe length Länge der Messsonde factory settingType of medium LiquidApplication Level, vesselMedium, dielectric constant Water-based, > 10Superimposed gas phase YesDielectric constant, upper medium (TS) 1.5Tube inner diameter 200 mmMax. adjustment - Level 100 %Distance: 0.000 m(d) - Note dead zonesMin. adjustment - Level 0 %Distance: Probe length - Note dead zonesMax. adjustment - Interface 100 %Distance: 0.000 m(d) - Note dead zonesMin. adjustment - Interface 0 %Distance: Probe length - Note dead zonesDamping - Level 0.0 sDamping - Interface 0.0 sLinearisation type LinearLinearisation - Socket correction 0 mmLinearisation - Vessel height Probe lengthScaling variable - Level Volume in lScaling unit - Level LitresScaling format - Level Without decimal positions