![Siemens SINUMERIK Series Function Manual Manual pdf 2 page image](https://manuals-archive2.s3.amazonaws.com/5625828/f28cf2d17fa95efe634c2a12cd6b41e02f.jpg)
Legal notesWarning conceptThis manual contains information which you must observe in order to ensure your own personal safety, as well asto avoid material damage. The notices referring to your personal safety are highlighted in the manual by a safetyalert symbol, notices referring only to equipment damage have no safety alert symbol. These notices are gradedaccording to the degree of danger as shown below.DANGERIndicates that death or severe personal injury will result if proper precautions are not taken.WARNINGIndicates that death or severe personal injury can result if proper precautions are not taken.CAUTIONwith a triangular safety alert, indicates that slight personal injury may result if proper precautions are nottaken.CAUTIONwithout triangular safety alert means that there can be damage to property if the corresponding safetymeasures are not followed.NOTICEindicates that an unintended result or situation can occur if the corresponding information is not taken intoaccount.If more than one level of danger is simultaneously applicable, the warning notice for the highest level is used. If awarning notice is used with the safety alert symbol to warn against injury, this same notice may also include awarning regarding property damage.Qualified personnelThe product/of system that belongs to this documentation may be used/operated by qualified personnel whilecarefully observing the appropriate documentation for the associated task, in particular, the safety and warningnotes provided in the documentation. As a result of their training and experience, qualified personnel are able torecognize any risks involved with handling these products/systems and avoid any possible dangers.Correct usage of Siemens productsNote the following:WARNINGSiemens products must only be used for the applications specified in the catalog and in the technicaldocumentation. If third-party products and components are used, they must be recommended or approved bySiemens. These products can only function correctly and safely if they are transported, stored, set up, mounted,installed, commissioned, operated and maintained correctly. The permissible ambient conditions must beadhered to. The notes in the associated documentation must be complied with.TrademarksAll designations with the trademark symbol ® are registered trademarks of Siemens AG. Other designations in thisdocumentation may be trademarks whose use by third parties for their own purposes can violate the rights of the owner.Disclaimer of liabilityWe have checked the contents of this document for agreement with the hardware and software described. However, sincedeviations cannot be precluded entirely, we cannot guarantee full consistency. The information given in this publication isreviewed at regular intervals and any corrections that might be necessary are made in the subsequent editions.Siemens AG 2012Subject to change without prior noticeCopyright © Siemens AG 1995 - 2012Order No. --