AppendixA.1 Comparison of GUD parameters up to measuring cycles version 7.5 and GUD parameters as of measuringcycles version 2.6, with reference to measuring function.Measuring cycles414 Programming Manual, 03/2009 Edition, 6FC5398-4BP10-2BA0GUD up to Version 7.5 MD/SD as of Version 2.6_KB[x,0] SD54621 $SNS_MEA_CAL_EDGE_PLUS_DIR_AX2[x]_KB[x,1] SD54622 $SNS_MEA_CAL_EDGE_MINUS_DIR_AX2[x]_KB[x,2] SD54615 $SNS_MEA_CAL_EDGE_BASE_AX1[x]_KB[x,3] SD54617 $SNS_MEA_CAL_EDGE_PLUS_DIR_AX1[x]_KB[x,4] SD54618 $SNS_MEA_CAL_EDGE_MINUS_DIR_AX1[x]_KB[x,5] SD54620 $SNS_MEA_CAL_EDGE_UPPER_AX2[x]_KB[x,6] SD54619 $SNS_MEA_CAL_EDGE_BASE_AX2[x]_TPW[x,1] SD54641 $SNS_MEA_TPW_TRIG_PLUS_DIR_AX1[x]_TPW[x,2] SD54642 $SNS_MEA_TPW_TRIG_MINUS_DIR_AX2[x]_TPW[x,3] SD54643 $SNS_MEA_TPW_TRIG_PLUS_DIR_AX2[x]_TPW[x,4] SD54644 $SNS_MEA_TPW_TRIG_MINUS_DIR_AX3[x]_TPW[x,5] SD54645 $SNS_MEA_TPW_TRIG_PLUS_DIR_AX3[x]_TPW[x,6] SD54646 $SNS_MEA_TPW_EDGE_DISK_SIZE[x]_TPW[x,7] SD54647 $SNS_MEA_TPW_AX_DIR_AUTO_CAL[x]_TPW[x,8] SD54648 $SNS_MEA_TPW_TYPE[x]_TWP[x,9] SD54649 $SNS_MEA_TPW_CAL_MEASURE_DEPTH[x]_CM[0] SD54670 $SNS_MEA_CM_MAX_PERI_SPEED[0]_CM[1] SD54671 $SNS_MEA_CM_MAX_REVOLUTIONS[0]_CM[4] SD54672 $SNS_MEA_CM_MAX_FEEDRATE[0]_CM[2] SD54673 $SNS_MEA_CM_MIN_FEEDRATE[0]_CM[5]] SD54674 $SNS_MEA_CM_SPIND_ROT_DIR[0_CM[6] SD54675 $SNS_MEA_CM_FEEDFACTOR_1[0]_CM[7] SD54676 $SNS_MEA_CM_FEEDFACTOR_2[0]_CM[3] SD54677 $SNS_MEA_CM_MEASURING_ACCURACY[0]_CM[8] MD51618 $MNS_MEA_CM_ROT_AX_POS_TOL[0]_CBIT[0]SD54655 $SNS_MEA_REPEAT_ACTIVE_CBIT[1] SD54656 $SNS_MEA_REPEAT_WITH_M0_CBIT[2] SD54657 $SNS_MEA_TOL_ALARM_SET_M0_CBIT[3] No function is assigned to this GUD._CBIT[4] No function is assigned to this GUD._CBIT[5] SD54659 $SNS_MEA_TOOL_MEASURE_RELATE_CBIT[6] No function is assigned to this GUD._CBIT[7] MD51610 $MNS_MEA_TOOLCARR_ENABLE_CBIT[8] MD51612 $MNS_MEA_MONO_COR_POS_ACTIVE_CBIT[9] No function is assigned to this GUD._CBIT[10] No function is assigned to this GUD._CBIT[11] No function is assigned to this GUD.
