AppendixA.1 Customer Support03.06A-488 © Siemens AG, 2006. All rights reservedSINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 03.2006 EditionTable A-1 Range of services for machinery construction OEMs and end customersPortfolio Description of the services availableCommissioning The safety functions are commissioned based on the configuration that hasbeen created. The customer provides the machine so that the drives can betraversed and the control cabinet is wired according to the configuration.Acceptance report Based on the submitted configuration documentation and commissioning,an acceptance report for the safety functions is drawn-up. This includes: Description of the machine (name, type, ...) Description of the safety and operator concept Description of the axis-specific safety functions All of the safety functions are tested including the SPL logic The test results are recordedThe customer receives the acceptance report as hard copy and on anelectronic data medium.Approval procedure Support with processing and line of argument for the approval procedure bycertified bodies (e.g. regulatory bodies) or large end customers.Workshop Workshops are held on the subject of machine safety adapted tocustomer-specific requirements; if required, these workshops can be held atthe customer’s site. Possible contents: Machinery Directive, Standards in general C Standards (machine-specific) Hazard analysis, risk analysis Control categories (acc. to EN 954-1) SINUMERIK Safety Integrated® – function and system description Configuration, machine data Commissioning Acceptance reportHotline An expert for “SINUMERIK Safety Integrated®” can be reached at theHotline number should series errors or problems occur during installationand commissioning (start-up).On-site service (local) Experts analyze problems that are encountered on-site. The causes areeliminated or counter-measures are drawn-up and implemented wherenecessary.
