47a ProgrammingThis chapter explains how to program various items.Before you start programming, press the m key and select the “6 PROGRAM MODE” or “7 SD CARDMODE” by using the I key and press the A key.Basic InstructionsThis section illustrates the basic programming by using an example of programming for departments.■ Programming screenOpening screen: When you select the “6 PROGRAM MODE”, your display will show a programmingopening screen corresponding to the mode you selected.Mode you are inNumeric entry and status information areaProgramming menu: Use the cursor keys or numeric key to selectan option, and press the A key.Code selecting screen (Dept. PLU):Selected menu/optionNumeric entry and status information areaCode number and its description(In case of PLU/UPC, two lines are used for one code, upper line -code, lower line - description.)Use the cursor keys or numeric keys to select an option, andpress the A key.Programming screen:Selected codeSetting items:Use the cursor keys to select an item.To select an option, follow the instruction shown below.Numeric entry: Use numeric keysCharacter entry: Use character keysSelective entry: Press P key to toggle options, or press theQ key to show the option list. Use thecursor keys to move the cursor and press theQ or A key to select it.
