Sharp MX-4110N Installation Manual

Also see for MX-4110N: Operation manual Operation guide

Contents

MX-5111N IC card reader 32 – 4Fold and put the rest of the cable under the bundle.Fix the cable at the USB connector socket section in theUSB mini harness side.* Fix so that the USB connection position is at the center ofthe card reader holder.Holder type CRDR-6081AKU, RDR-7582AKUHang the cable on the two hooks and wind it so that there isno slack.* If there is some slack, the cable may be pinched.Fold and put the rest of the cable under the bundle.Bind the root section of the USB connector in the cardreader side and the USB connector socket section in theUSB mini harness side with the binding bands.* Fix so that the USB connection position is at the center ofthe card reader holder.Holder type CTWN3Hang the cable on the two hooks and wind it so that there isno slack.* If there is some slack, the cable may be pinched.Fold and put the rest of the cable under the bundle.Bind the root section of the USB connector in the cardreader side and the USB connector socket section in theUSB mini harness side with the binding bands.* Fix so that the USB connection position is at the center ofthe card reader holder.: '11/Jul/251