Sharp MX-4110N Installation Manual

Also see for MX-4110N: Operation manual Operation guide

Contents

MX-5111N IC card reader 32 – 2B. Attachment to the IC card reader holder1) Attach the card reader fixing tape to the IC card reader holderreferring to the notches as the reference.* The holder type and the attachment procedure differdepending on the kind of the IC card reader.Holder type BY591-EHID-201 v01Vertical and horizontal directions: Fit with the notches.Holder type CRDR-6081AKU, TWN3, RDR-7582AKUVertical direction: Fit with the notch.Horizontal direction: Fit with the notch and the lower edge.2) Cut out the boss.* The cutting position of the boss of the IC card reader holderdiffers depending on the kind of the IC card reader.Holder type CRDR-6081AKU, RDR-7582AKUHolder type CTWN33) Attach the IC card reader to the IC card reader holder accord-ing to the attachment reference ribs.* The attachment reference position differs depending on thekind of the IC card reader.Holder type BY591-EHID-201 v01(No reference position): '11/Jul/251