Sharp LC-70UQ17U Operation Manual

Also see for LC-90LE657U: Technical specifications Setup guide Operation manual Setup guide Operation manual

Contents

Enjoying 3D Image Viewing (For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)ENG 5-6Troubleshooting - 3D ImagesProblem Possible solution3D images are not displayed. Is “3D auto change” set to “Off”? Press 2D/3D to switchto 3D mode(Page 5-11).If “3D auto change” is set to “Mode1” or “Mode2” but no3D images are displayed, check the display format of thecontent being viewed. Some 3D image signals may notbe recognized as 3D images automatically. Press 2D/3Dto select the appropriate display format for the 3D image(Page 5-9).Is the power of the 3D glasses turned on? Press thepower button for at least 2 seconds to turn on the 3Dglasses.Are the 3D glasses set to 2D mode? Press the powerbutton for an amount of time that is less than 2 secondsto switch the 3D glasses to 3D mode.Is there an obstacle between the 3D glasses and the TV,or is something covering the receiver on the 3D glasses?The 3D glasses operate by receiving a signal from theTV. Do not place anything between the 3D emitter on theTV and the receiver on the 3D glasses.Images displayed in 3D modeappear doubled while you arewearing the 3D glasses.Is the power of the 3D glasses turned on? Press thepower button for at least 2 seconds to turn on the 3Dglasses.Images displayed in 3D modeappear 2D while you are wearingthe 3D glasses.Are the 3D glasses set to 2D mode? Press the powerbutton while viewing 2D images, the LED light blinks ingreen and the 2D images switch to 3D images.For further details, refer to the operation manual of the 3D glasses.