Sharp LC-70UQ17U Operation Manual

Also see for LC-90LE657U: Technical specifications Setup guide Operation manual Setup guide Operation manual

Contents

Using the InternetENG 9-3Internet Setup (Continue)Wireless SetupMake adjustments and confirm the settings necessary forwireless LAN connection (such as search for the accesspoint and registration of it).WPS push button: Allows the TV to automaticallyestablish the connection using a button on the accesspoint.WPS PIN code: Sets up the connection by registering aPIN code for the access point.Selecting wireless network: Searches for and selects theaccess point to be connected.Registering wireless network: Allows you to make theconnection by entering an SSID for the access point.If your access point supports Wi-Fi Protected Setup (WPSpush button method), it is recommended that you use thisfunction for the wireless connection. You can press the WPSbutton on the access point to configure the settingsautomatically.The name of the WPS button function may differdepending on the access point. See the operationmanual of the access point for details.1 Confirm the current settings in "Connection Type".If "Wired" is selected, press / to select "Wireless".2 Press / to select "Wireless Setup", and then pressENTER.Confirm the settings. If each setting item is correct,press MENU to exit.If you are configuring the wireless setup for the firsttime or changing the settings, go to step 3.3 Press / to select "Change", and then press ENTER.4 Select the desired connection method and follow theinstructions shown on the display.5 When a connection is established, the connection detailsare displayed. Press ENTER.NOTEOperations cannot be guaranteed when used with accesspoints that do not have Wi-Fi® certification.A wireless LAN router/access point is required to connectthe TV to the Internet using a wireless LAN. See theoperation manual of your access point for setup.If your access point is set to a stealth mode (thatprevents detection by other devices), you may not beable to establish a connection. In this case, disable thestealth mode on the access point.A stable connection speed is required to play backstreaming content. Use an Ethernet connection if thewireless LAN speed is unstable.Before transferring to a third party or disposal, be sure toinitialize the wireless LAN settings.Please follow the legislation in your country when usingthe wireless LAN outdoors.IP SetupYou can make adjustments manually for the IP.Check that numbers are displayed for each setting.If there are any settings without numbers, specify thenumbers by following the on-screen instructions.Input the IP address by using remote control buttons 0-9.Example