8·38"Only when using fixed allocation"Enter the number of slave station I/O points [HEX (hexadecimal), bytes](Applied to item on pages 8·31 and 8·35)· Store the number of I/O points per slave station at parameter address 000200 (8).· The number of slave stations that can be connected varies with the setting for the number of I/Opoints per slave station.Initial value: 00 (H)· Allocates the number of I/O points per slave station as 64 points per unit or 128 points per unit,starting from the top address set by the procedure on the previous page.Ex.: When a remote I/O's top address is 0200 and the number of slave station I/O points is 64.(When set for 64 points per station using the JW-13PG)eulavteS stniopO/IforebmuN tahtseludomforebmuN.detcennocebnac00 )H( noitats/stniop46 36ot0 )D(10 )H( noitats/stniop821 23ot0 )D(00176 HEX 0000177 HEX 00I PARAM.>00200 HEX 00Slave station 01Slave station 02Slave station 03Slave station 04(64 points)(64 points)(64 points)(64 points)02000210022002300240Remote I/O top addressDisplay the contents ofaddress 000200 (8)Write00 (H)Screen display of JW-13PG
