3-28USING CONVENIENTFUNCTIONS 1Note11Enter the day using the numeric keys (0 to 7).The day codes are as follows:0: Sunday 4: Thursday1: Monday 5: Friday2: Tuesday 6: Saturday3: Wednesday 7: no selectedl When you do not want to enter a specific day, enter press the "7" key.l Instead of pressing the keys from "0" to "7", you can use the leftarrow key ( ) or right arrow key ( ) to select the day and press theENTER key.CancellingWhen you make a mistake entering the time or day...Press the CLEAR key and continue with step 8. (See the previous page)12Press the START key.SELECT COMM. MODEPRESS (1-7)l Confirm that the time and day are set correctly and press the STARTkey.l The procedures for the following operations are different. Please refer to thepages listed.Normal sending (See the next page)Broadcast sending (See page 3-32)Confidential sending (See page 3-33)Relay request (See page 3-34)Polling (See page 3-35)Serial polling (See page 3-36)Memory polling (See page 3-37)l After setting a program operation, you can performother operations. However, if you want the programoperation to execute on time, make sure to finish theother operations before the scheduled timer operation.If another operation is in progress at the same timeas a program operation is scheduled, the programoperation executes when the other operation isfinished.l You can print out a list of the program operations youhave entered. (See page 5-4)ProgramsPROGRAMS
