Sealey VS0062 Instructions Manual

instructions forcombustion leak detectormodel no: Vs0062thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. saFetY WarninG! ensure that Health & safety, local Authority regulations and general workshop practice regulations are adhered towhen using tools.8 do not use leak detector if damaged.9 maintain leak detector to ensure that it is in an adequate condition for safe use and optimum performance.8 do not attempt to start or move a vehicle whilst in gear.9 Wear suitable clothing to avoid snagging.8 do not wear jewellery. tie back long hair.9 Account for all tools, parts and components being used.8 do not leave tools in or near the engine. return tools to suitable storage after use.9 When not in use, store in a safe dry and childproof place.2. introductiondiagnose blown gaskets, cracked blocks and cylinder heads easily and quickly. checks levels of co2 in cooling system and indicates itspresence by test fluid colour change. use with cone adaptor or in conjunction with radiator caps from model no’s Vs001,Vs0011,Vs0033 andVs006. for test fluid refill order model no. Vs0061f.3. contentsstorage Bottlerubber BulbAcrylic testchamber co2 test liquidVs0061fcone AdapterVs0062 | issue:1 05/05/16Original Language Version© Jack sealey limitedrefer toinstructionmanualWear eyeprotectionWearprotectiveclothingWearprotectiveGloves

/ 2

Related manuals for Sealey VS0062