Sealey TC10 Instructions Manual

instructions fortyre changer - automaticmodel no: tc10thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to theseinstructions, and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.tc10 | issue 1 02/02/18Original Language Version© Jack sealey limitedrefer toinstructionselectricalshockhazardcrushingof handshazardWear eyeprotectionWear protectiveglovesWear earprotectionWear safetyfootwearWear protectiveclothingDo not standbehind thecolumnDo not put anybody part underthe tool headWhen beadbreaking theblade movesvery quickly tothe left. theoperator shouldnot standbetween theblade andthe tyreWarning!electricityWhen clampingthe rim, Do notplace hand orany other partof the bodybetween theclamping jaw andthe wheel rim.1. Warning label locationS