Sealey AK9623EV Instructions Manual

Also see for AK9623EV: Instructions

1 Internal Measure2 Metric/Imperial Selector3 Locking Screw4 ABS/0 Switch5 LCD Display6 External Measure7 On/Off Control8 Zero Control9 Battery Cover10 Depth Measure11 Step MeasureINSTRUCTIONS FOR:MODEL: AK9623EVThank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions andproperly maintained, give you years of trouble free performance.IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS, ANDCAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE, FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SOMAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.DIGITAL VERNIER CALLIPER 0-300mm/0-12” WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered towhen using tools and equipment. DO NOT use if damaged. Maintain calliper in good and clean condition for best performance. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep children and unauthorised persons away from the work area. DO NOT use the calliper for any purpose other than for which it is designed. DO NOT get calliper wet or use in damp or wet locations, or areas where there is condensation. Keep calliper cleanand dry using a dry cotton cloth only. DO NOT dip or submerge the calliper in any type of liquid. DO NOT expose calliper to bright sunlight or dust. DO NOT disassemble. The calliper must be checked by qualified service personnel only. DO NOT apply any voltage to the calliper i.e. with an electric marker pen. The calliper is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks. Use in reasonably constant temperature conditions of approximately 20°C. When not in use, turn off and store gauge in a safe, dry, childproof location.Hardened and tempered stainless steel digital calliper with satin finish. 11mm High figures in LCD display for ease of reading.Metric and Imperial calibration with conversion between the two. Zero setting control allows for comparative measurement.Supplied in carry-case.1. SAFETY INSTRUCTIONS2. INTRODUCTION & SPECIFICATIONResolution 0.01mm (0.0005”)Range 0-300mm (0-12”)Accuracy ±0.04mm/0.001”Functions Zero set, mm/inch select, incremental zeroMessages Flashing display = replace batteryBattery life Approx. two years (approx. one year in continuous service)Battery LR44 - 1.5VOperational Temperature range 0 - 40°C1 2 3 4567 891011AK9623EV Issue No: 1 - 24/09/08

/ 2

Related manuals for Sealey AK9623EV