Sealey AK9621EV Instructions Manual

Also see for AK9621EV: Instructions

AK9621EV Issue: 2 - 07/09/17Original Language Version© Jack Sealey LimitedIMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCTCORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILLINVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructionsand maintained properly, give you years of trouble free performance.Refer to instructionmanual1. SAFETYINSTRUCTIONS FOR:DIGITAL VERNIER CALIPER 0-150mm/0-6”STAINLESS STEELMODEL NO: AK9621EV WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using toolsand equipment. DO NOT use AK9621EV if damaged. Maintain AK9621EV in good and clean condition for best performance. Keep children and unauthorised persons away from the work area. DO NOT use the AK9621EV for any purpose other than for which it is designed. DO NOT get AK9621EV wet or use in damp or wet locations, or areas where there is condensation. Keep AK9621EV clean and dry using adry cotton cloth only. DO NOT expose AK9621EV to bright sunlight or dust. DO NOT dismantle AK9621EV. DO NOT apply any voltage to the AK9621EV. The AK9621EV is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks. Use AK9621EV in reasonably constant temperature conditions of approximately 20OC. When not in use, turn off and store gauge in a safe, dry, childproof location.2. INTRODUCTIONHardened and tempered stainless steel digital caliper with satin finish. Large LCD display with 11mm high figures for ease of reading. Metric andImperial calibration with conversion between the two. Zero setting control allows comparative measurement.3. SPECIFICATIONModel No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AK9621EVRange: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-150mm(0-6")Resolution: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01mm(0.0005")Accuracy <100mm:. . . . . . . . . . . . . . . . . . . . . . ±0.03mm(0.001")Accuracy >100mm:. . . . . . . . . . . . . . . . . . . . . . ±0.03mm(0.001")Battery: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 x LR44 (supplied)1 Internal Measure2 mm\inch Button3 Locking Screw4 Fine Adjust Wheel5 LCD Display6 External Measure7 On/Off Button8 Zero Button9 Battery Cover10 Depth Measure11 Step Measurefig.1

/ 2

Related manuals for Sealey AK9621EV