Sealey AK9623EV Instructions Manual

Also see for AK9623EV: Instructions

instructions fordigital vernier caliper 0-300mm/0-12”model no: aK9623evthank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. Safety Warning! ensure Health and safety, local authority and general workshop practice regulations are adhered to when using tools andequipment.8 dO nOt use if damaged.9 maintain calliper in good and clean condition for best performance.9 Keep the work area clean, uncluttered and ensure there is adequate lighting.9 Keep children and unauthorised persons away from the work area.8 dO nOt use the calliper for any purpose other than for which it is designed.8 dO nOt get calliper wet or use in damp or wet locations, or areas where there is condensation. Keep calliper clean and dry using adry cotton cloth only.8 dO nOt dip or submerge the calliper in any type of liquid.8 dO nOt expose calliper to bright sunlight or dust.8 dO nOt disassemble. The calliper must be checked by qualified service personnel only.8 dO nOt apply any voltage to the calliper i.e. with an electric marker pen.9 The calliper is a precision instrument, treat with care, avoid using force and do not subject to knocks or shocks.9 use in reasonably constant temperature conditions of approximately 20°c.9 When not in use, turn off and store gauge in a safe, dry, childproof location.2. intrOductiOnHardened and tempered stainless steel digital calliper with satin finish. 11mm High figures in LCD display for ease of reading. Metric andImperial calibration with conversion between the two. Zero setting control allows for comparative measurement. Supplied in carry-case.3. SpecificatiOnmodel no: ..............................................................AK9623eVrange: ........................................................ 0-300mm (0-12”)resolution: .................................................0.01mm (0.0005”)Accuracy<100mm: .....................................±0.02mm (0.001”)Accuracy>100mm: .....................................±0.04mm (0.002”)refer toinstructionmanual1 2 3 4567 8910111 Internal measure2 metric/imperial selector3 locking screw4 ABs/0 switch5 LCD display6 external measure7 on/off control8 Zero control9 Battery cover10 Depth measure11 Step measureAK9623EV | Issue 2(L) 10/07/17Original Language Version© Jack sealey limited

/ 2

Related manuals for Sealey AK9623EV