Sealey AK2958 Manual

3-IN-1 INTERCHANGEABLE PROPANE TORCHSETMODEL NO: AK2958Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Refer toinstructionmanualOriginal Language Version© Jack Sealey LimitedWear eyeprotection Wear protectivegloves1. SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using thisequipment. WARNING! Always wear approved eye or face protection when operating the torch. WARNING! Butane gas is extremely flammable, handle with care. WARNING! Always point the torch away from the eyes and body when igniting and during operation. WARNING! Ensure the Gas Controller Knob is firmly closed and the flame completely extinguished after use. WARNING! DO NOT puncture the cartridge or dispose of in a fire.8 DO NOT use the torch in an area where paint fumes, solvents or other flammable solids, liquids or gases pose a potential hazard.Keep flammable material away from the torch when operating. Flammable waste, such as wiping or cleaning rags, must be placed in aclosed metal container and disposed of correctly.8 DO NOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating medication.8 DO NOT hold the workpiece by hand. Use clamps or a vice (not included) to secure the workpiece.8 DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/or possible personal injury.8 DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.8 DO NOT touch the burner tube during or immediately after use as it will be very hot. Allow to cool.8 DO NOT leave the torch operating unattended.8 DO NOT use this torch continuously for longer than one hour.8 DO NOT allow children to operate the torch.9 Disconnect the gas cartridge when not in use. Store cartridge away from direct sunlight in a safe, dry, childproof area, where thetemperature will not exceed 40°C (104°F).9 After use, allow the torch to cool before storing it.IMPORTANT! Observe cautions on the gas cartridge label.2. INTRODUCTIONSupplied with 3 interchangeable heads: Pin-point flame, Soft flame and Swirling flame, suitable for a range of soldering andbrazing jobs. Fitted with heavy duty piezoelectric ignition, safety lock and continuous flame switch. Precision heat controlwith fine gas pressure adjustment. Suitable for CGA600 propane gas fuel types. Flame temperature: 1800ºC to 2200ºC. Costeffective alternative to oxy/acetylene torches. Supplied in EVA storage tray.3. CONTENTS3.1. Three types of burner nozzle provided (fig.1)Hot surfacesfig.1 No. Description1 Main Body2 Blast Flame(for brazing and large soldering.)3 Pin point flame (for precision / small solderingjobs.)4 Large soft flame (for shrinking and heating jobs)3421AK2958 Issue:1 04/10/22

/ 2

Related manuals for Sealey AK2958