Sealey AK2955 Instructions Manual

MICRO BUTANE SOLDERING/HEATINGTORCHESMODEL NO: AK2955Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using thisequipment. WARNING! Always wear approved eye or face protection when operating the torch. WARNING! Butane gas is extremely flammable. Handle with care. WARNING! Always point the torch away from the eyes and body when igniting and during operation. WARNING! Ensure the gas controller knob is firmly closed and the flame completely extinguished after use. WARNING! DO NOT puncture the cartridge or dispose of in a fire.8 DO NOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating medication.8 DO NOT hold the work piece by hand. Use clamps or a vice (not included) to secure the workpiece.8 DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/or possible personal injury.8 DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.8 DO NOT touch the burner tube during or immediately after use as it will be very hot. Allow to cool.8 DO NOT leave the torch operating unattended.8 DO NOT use this torch continuously for longer than one hour.8 DO NOT allow children to operate the torch.9 Disconnect the gas cartridge when not in use. Store cartridge a way from direct sunlight in a safe, dry, childproof area, where thetemperature will not exceed 40oC (104oF).9 After use, allow the torch to cool before storing it.IMPORTANT! Observe cautions on the gas cartridge label.2. INTRODUCTIONCompact, high capacity burner head with push-button piezoelectric ignition. 1750°C Adjustable burner flame size gives wide applicationpossibilities. Ideal for occasional plumbing tasks where space may be limited. Accepts standard Butane self-sealing cartridges (not included).Refer toinstructionmanualWear eyeprotection Wear protectiveclothingOriginal Language Version© Jack Sealey LimitedBurner tube Piezo electronicignitionGas controller knobConnectorGas cartridgeAK2955AK2955 Issue 2 (H,F) 10/05/23

/ 2

Related manuals for Sealey AK2955