Samsung UA43N5470AUXXL User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

04 Running the Initial SetupWhen you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows youto configure the basic settings for the TV to operate, such as broadcast reception, channel search, and networkconnection, at one time.• Before starting the Initial Setup, be sure to connect external devices first.• To use the TV's smart features, the TV must be connected to the Internet.• Noise may occur temporarily when the TV communicates with mobile devices.• The SmartThings app is available on mobile devices for Android 6.0 or higher and iOS 10 or higher.• To perform initialisation by using the SmartThings app, the mobile device must have been connected viaWi-Fi.• When the pop-up for setup does not appear automatically on the SmartThings app of your mobiledevice, proceed with the process after manually adding the TV using Add Device on the dashboard of theSmartThings app.You can also start the Initial Setup using the TV's menu ( > Settings > General > Start Setup).Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit yourviewing environment.Using the TV ControllerYou can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control Menu.The Control menu appears when the TV Controller is pressed while the TV is On. For more information about itsusage, refer to the figure below.• The screen may dim if the protective film on the SAMSUNG logo or the bottom of the TV is not detached.Please remove the protective film.Control menu: Power off : Volume Up: Channel Up : Volume Down: Channel Down : SourceTV Controller / Remote control sensorPress: MovePress & Hold: SelectThe TV Controller is located on the bottomof the TV.English - 13