Samsung SSC-1000 User Manual

Also see for SSC-1000: Specifications

Contents

specifications

19User’s Guide184) Manipulating the MATRIX SWITCHER!! MANUAL SELECT actionThis is a function for putting out camera visuals of your discretion inthe monitor of your discretion.Monitor selection is MON+NO.+ENTER, and camera selection isCAM+NO.+ENTER. At this time, install so that the matrix switcherinput channel number and the address no of either the camera or thereceiver unit are the same.The selected monitor number and the camera number get indicated inthe first line of the LCD.And, the matrix switcher's action mode gets indicated in the second line.@@ SEQUENCE SWITCHING actionThis is a function for automatically converting the camerascorresponded to each monitor of the matrix switcher.When you press the SEQUENCE button in the manual select mode,cameras corresponded with monitors indicated in the LCD getconsecutively converted.At this time, sequence run is indicated in the LCD. If you press theHOLD button in the sequence run mode, automatic conversion actionsare stopped, and sequence hold gets indicated in the LCD.If you press the NEXT or BEFORE button in this state, it getsconverted to the next visuals or the previous visuals of the visuals beingput out presently.If you want to automatically convert again, press the SEQUENCEbutton. If you want to convert the SEQUENCE RUN Mode to themanual select mode, press CAM+NO.+ENTER.3) Manipulating the RECEIVER UNIT! For receiver unit manipulation, as only those applying to the cam no.indicated in the LCD are possible, first select the camera you wan tomanipulate. For camera selection, when you press CAM + NO. +ENTER, the concerned camera number gets indicated in the LCD.(The camera number is the address number of the receiver unit)@ In the third line of the LCD, the camera's action state gets indicated.Initially, it appears as “MANUAL”. And, in this state, by using the JoyStick and Lens control buttons, you can manipulate the light turningmark and the lens.# PRESET actionThis is a function for selecting and watching the preset POSITION setup in the receiver unit. If you want to select the preset position youwant, press the PRESET button, put in the appropriate number in theposition you want, and press the ENTER button. At this time, the LEDof the PRESET button gets turned on, “PRESET [ ]” gets indicated inthe LCD. If you want to cancel the preset, press the PRESET buttononce again.$ AUX power controlThis is a function for manipulating the aux power of the receiver unit.If you want to put out the power of AUX1~AUX4, press the appropriateAUX button. At this time, in the fourth line of the LCD, the appropriateaux gets indicated. If you want to cancel the aux power output, pressthe appropriate AUX button.SSC-1000 (gb) 2009.1.8 1:38 PM Page 18

/ 13

Related manuals for Samsung SSC-1000