Samsung SCC-101 User Manual

Also see for SCC-101: User manual

Lamp ON: Stand-byMoves the ZOOM(OPTICAL & DIGITAL) lens in the direction of WIDE.Moves the ZOOM(OPTICAL & DIGITAL) lens in the direction of TELE.Moves the FOCUS lens in the direction of FAR.Moves the FOCUS lens in the direction of NEAR.Flips the content of the screen from left to right.Freezes the content of the screen.Runs Auto Focus.• Pushing the button enter the SETUP MENU of camera• In case of being sub menu, enters into sub menu.Moves the CURSOR up in the Menu.Moves the CURSOR down in the Menu.Moves the each setting CURSOR left in the MENU.Moves the each setting CURSOR right in the MENU.POWER(Lamp)WTFARNEARMIRRORFREEZEAFSET ( )UP ( )DOWN ( )LEFT ( )RIGHT ( )FUNCTION DESCRIPTIONNAMEThank you for purchasing a SAMSUNG Camera Zoom&OSD Controller.Before attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Camera Zoom & OSD Controller SCC-101 User’s ManualENGLISHCamera ZOOM&OSD control does possibility conveniently by SCC-101Available Model : 1) BOX type ZOOM CAMERA(ex: SDZ-300/330, etc)2) IR CAMERA(ex: SIR-4150/4250, etc)3) Dome camera that RS485 communication is available(ex: SID-500, SVD-4300. etc)Samsung Techwin cares for the environment at all productmanufacturing stages to preserve the environment, and is taking anumber of steps to provide customers with more environment-friendly products.The Eco mark represents Samsung Techwin swill to create environment-friendly products, and indicates that theproduct satisfies the EU RoHS Directive.Components and AccessoriesSCC-101 SCC-101 Zender User’s ManualCamera Zoom & OSD Controller SCC-101Overview ConnectionSCC-101 SPECIFICATIONAbout 3.0M (Ø 3.5mm)Circular jack (socket)EX) SDZ-3301) Box type ZOOM Camera: Direct connection2) IR Camera & Dome camera that RS485 communication is available : Use SCC-101 ZenderMODELDescriptionMODEDATA BITBIT/secPARITYCAM ID NOReturn PacketIR-CAMERAUse does possibility immediatelyin Factory default mode.SERIAL8BIT9600bpsNONE/EVEN1~255 is available-BOX TYPE ZOOM CAMERA &Dome camera that RS485communication is availableUse does possibility after changeCOMMUNICATION settings ofthe Factory default mode.SERIAL8BIT9600bpsEVEN0ENABLEMODELPower ConsumptionCommunicationDimensionsCable LengthWeightOperational temperatureWarrenty periodSCC-101About 0.5W (DC 12V, About 40mA)RS-48552.5(W) x 81.0(H) x 8.5(D)mmAbout 3MAbout 130g0˚C~50˚COne year from purchase dateSCC-101 RS485 TERMINALConnect TRX+(WHITE) line of theCAMERA and WHITE line of ZENDER.Connect TRX-(BLACK) line of theCAMERA and GRAY line of ZENDER.Connect SCC-101 ZENDERJACK and SCC-101 JACK.SCC-101 POWER TERMINALSIR4150 POWER INPUT TERMINALCONNECT TO SCC-101POWER TERMINAL(RED:+12V / BLACK:GND crocodile clip)EX) SIR-4150SCC-101Camera Zoom & OSD Controller SCC-101• If ZOOM CAMERA isn't, only OSD control is available.NotesCamera Zoom & OSD Controller SCC-101 Camera Zoom & OSD Controller SCC-101ZENDERCAMERA Communication SettingsCommunicationP/No. : Z6806-0104-01AVAN 08. 01www.samsungtechwin.comwww.samsungcctv.com• SAMSUNG TECHWIN CO., LTD.145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, KoreaTEL : +82-31-740-8151~8158 FAX : +82-31-740-8145• SAMSUNG OPTO-ELECTRONICS UK, LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPSTEL : +44-1932-45-5308 FAX : +44-1932-45-5325SALES NETWORK

/ 1

Related manuals for Samsung SCC-101