Samsung SPE-400 User Manual

Also see for SPE-400: User manual

4. Set the alarm output button.This setup is for the alarm output button in the monitoring page. Mode: Sets the alarm output method. There is difference between operations when clicked alarm output button while disabled.- Pulse : It is activated during the time period specified by the duration (switchinginterval) and then becomes inactive automatically.- Active/Inactive : It maintains as activated until the user clicks the button again tomake it inactive. Duration : Set the alarm duration that maintains activated if the mode is set topulse, from 1 to 15 seconds.5. When done, click [Apply ( )].SYSTEM SETUPProduct information1. From the Setup menu, select the<System ( )> tab.2. Click <Product information>.3. Check the encoder information, orprovide details according to yournetwork environment. Model : Model name of the product. Serial number : Product serial number. Device name : Provide a device name that will be displayed on the Live screen. Location : Specify the location where the encoder is installed. Description : Provide detailed information about the encoder location. Memo : Provide an explanation about the encoder for better understanding. Language : Select a preferred language for the Web Viewer OSD.M  The default language is set to <English>.4. When done, click [Apply ( )].● SETUP SCREENEnglish _79