Menu
Samsung SNOW-1703ULD User Manual
Also see for IF012J: User manualUser manual
                                                                                                    |
68Network SettingsConnecting to a Wired NetworkThere are three ways to attach your product to your LAN using cable.• You can attach your product to your LAN by connecting the LAN port on the back of yourproduct to an external modem using a LAN cable.See the diagram below.The Modem Port on the WallModem Cable LAN CableExternal Modem(ADSL / VDSL)LANRJ45• You can attach your product to your LAN by connecting the LAN port on the back of yourproduct to an IP Sharer which is connected to an external modem. Use LAN cable for theconnection. See the diagram below.The Modem Port on the WallModem Cable LAN Cable LAN CableExternal Modem(ADSL / VDSL)IP Sharer(having DHCP server)LANRJ45• Depending on how your network is configured, you may be able to attach your product toyour LAN by connecting the LAN port on the back of your product directly to a network walloutlet using a LAN cable.See the diagram below. Note that the wall outlet is attached to a modem or routerelsewhere in your house.LAN CableThe Modem Port on the WallLANRJ45If you have a Dynamic Network, you should use an ADSL modem or router that supportsthe Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCPautomatically provide the IP address, subnet mask, gateway, and DNS values your productneeds to access the Internet so you do not have to enter them manually. Most home networksare Dynamic Networks.Some networks require a Static IP address. If your network requires a Static IP address, youmust enter the IP address, subnet mask, gateway, and DNS values manually on your productCable Setup Screen when you set up the network connection. To get the IP address, subnetmask, gateway, and DNS values, contact your Internet Service Provider (ISP).If you have a Windows computer, you can also get these values through your computer." You can use ADSL modems that support DHCP if your network requires a Static IP address." ADSL modems that support DHCP also let you use Static IP addresses." A Static IP address is recommended. If the IP address is changed by DHCP, LED SignageManager may be disconnected. |
Related manuals for Samsung IF012J
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved