61Contrast / Brightness / Sharpness / Color /Tint (G/R)m MENU → Picture → EYour product has several options for adjusting picture quality." When you make changes to Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSDwill be adjusted accordingly." You can adjust and store settings for each external device you have connected to an inputon the product." Lowering picture brightness reduces power consumption.Color Temperaturem MENU → Picture → Color Temperature → EAdjust the color temperature (Red / Green / Blue). (Range: 2800K–10000K)" Enabled when Color Tone is set to Off." If Picture Mode is set to Calibration, Color Temperature is disabled.White Balancem MENU → Picture → White Balance → E2 PointAdjust the color temperature for a more natural picture.• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.• Reset: Suitable for environments where videowall display are used.10 PointControls the white balance in 10 point interval by adjusting the red, green, and blue brightness.• Off / On• Interval: Select interval to adjust.• Red: Adjust the red level.• Green: Adjust the green level.• Blue: Adjust the blue level.• Reset: Suitable for environments where videowall display are used." Some external devices may not support this function." Enabled when Picture Mode is set to Office & School (Video/Image).