53On/Off Timer→ On/Off Timer → EOn/Off Timer" The displayed image may differ depending on the model." You must set Clock Set before you can use this feature.On TimerSet On Timer so that your product turns on automatically at a time and on a day of your choosing.The product turns on according to the settings of the specified input source.On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current timefirst.(On Timer 1 ~ On Timer 7)• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.If you select Manual, you can choose the days you want On Timer to turn on your product.– The check mark indicates days you’ve selected.• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Usethe left and right arrow buttons to change entry fields.• Source: Select the input source of your choice.• Content (when the Source is set to Internal/USB): From the connected USB device or the internal memorydevice, select a folder containing the video or photo file that will be played when the product turns on." This function is available only when a USB device is connected." If there is only one photo file in the USB, the Slide Show will not play." If a folder name is too long, the folder cannot be selected." Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure thefolders assigned to each USB have different names." We recommend that you use a USB memory stick and a multi card reader when using On Timer." The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made bysome manufacturers because the product can take too long to recognize these devices.