86LCD BrightnessYou can adjust the brightness of the LCD screen to compensate for ambient lighting conditions.LCD ColourYou can change the colour impression of the screen with a variety of colour options by adjusting the red andblue colour range.1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “LCD Brightness.”2. Move the Control joystick (//OK) to adjust the LCD brightnessfrom -15 to 15.3. Press the MENU button to exit the menu.• If the surrounding is too bright, adjust the brightness of the LCD screen.• Adjusting the LCD screen does not affect the image being recorded.• Brighter LCD screen consumes more power.• You can adjust the LCD Brightness from -15 to 15.1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “LCD Colour.”2. Move the Control joystick (////OK) to adjust the LCDcolour (red/blue) from -15 to 15.3. Press the MENU button to exit the menu.• When you set red and blue colour range, the higher the fi gures, thebrighter the LCD screen will be.• You can adjust the LCD colour (red/blue) from -15 to 15, using theControl joystick (////OK).• You can manipulate the colour displayed on the LCD screen byadjusting the colour ratio of red and blue.• Adjusting the colour display of LCD screen does not affect the image tobe recorded.SettingsLCD ColourDate/Time DisplayLCD BrightnessExitSTBY 0:00:00 [475Min]SelectSCENE12OFF:: 00:00:00 [475Min]STBY0Exit Move OK0LCD ColourBlueRed1.6M9999system settingSettingsLCD BrightnessTime TypeDate/Time DisplayExitSTBY 0:00:00 [475Min]SelectSCENE12OFF:: 0:0:00:00 [475Min]STBYLCD Brightness0Exit Adjust OK1.6M9999
