Samsung SMX-F40SP User Manual

Also see for Camcorder: Owner's manual

Contents

111Adjusting the image during recordingSymptom Explanation/SolutionFocus does notadjust automatically.Set “Focus” to “Auto.” page 57The recording conditions are not suitable for auto focus.Adjust the focus manually. page 58The lens is dusty on the surface. Clear the lens and check the focus.Recording is being made in a dark place. Increase the brightness in theplace.••••The image appearstoo bright or flickering,or changes in colour.This occurs when recording images under a fluorescent lamp, sodiumlamp, or mercury lamp. Cancel “iSCENE” to minimise these phenomena.page 46•Playback on other devices (TV, etc.)Symptom Explanation/SolutionYou cannot viewthe image or hearthe sound on theconnected device.Connect the audio line of the Audio/Video cable jack to your camcorderand the connected device (TV, DVD recorder, etc). (Red colour- right, Whitecolour- left)The Audio/Video cable jack is not connected properly. Make sure that theAudio/Video cable jack is connected to the proper jack. page 93••Playback on your camcorderSymptom Explanation/SolutionPressing theplayback (Play/Pause) button didnot start playing.Press the MODE button to set Video Play mode.Image files recorded on another camcorder may not play on yourcamcorder.Check out a memory card compatibility. page 32•••The Skip or Searchfunction does notwork properly.If the temperature inside the camcorder is too high, it cannot functionproperly.Turn the camcorder off, wait for a few moments, and turn it on again.•Playback isinterruptedunexpectedly.Check if the AC adaptor or battery pack is properly connected and stable.•You cannot hearsound when playinga Time Lapserecording.The Time Lapse REC function does not support sound. page 64•Photos stored on astorage media arenot displayed in theactual size.Photos recorded on other devices may not appear at actual size.This is not an error.•