9DemoDemo mode automatically shows you the major functions that are included with your camcorder so that youmay use them more easily.system settingUsing the Demo function• The Demo mode is cancelled in the following cases:- If any button is operated (Recording start/stop, PHOTO, SMART AUTO, etc.) However,the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode ifit is idle for 5 minutes without operation. If you don’t want the Demo function to start, set“Demo” to “Off.”1. Press the MENU button Control joystick (/) “Settings” Control joystick (//OK) “Demo.”2. Select the desired submenu item with the Control joystick (/),and then press the OK button.3. To return to the normal screen, press the MENU button.Submenu Itemsitems contents on-screendisplay“Off” Disable the function. -“On” Enables the Demo function. -The Demo function does not operate in the following cases:- If “Auto Power Off” is set to “5 Min”(uses the battery as main power), the Auto Power Off functionwill operate prior to Demo.SettingsDemoVersionLanguageSCENEExitSTBY 0:00:00 [475Min]Select:SettingsDemoSCENEVersionLanguageExit Move SelectSTBY 0:00:00 [475Min]OffOnOFF
