Samsung SMX-F40SP User Manual

Also see for Camcorder: Owner's manual

Contents

11Connecting to a computerSymptom Explanation/SolutionWhen using thevideos, a computerdoes not recogniseyour camcorder.Disconnect the USB cable from the computer and camcorder, restart thecomputer, then reconnect it correctly.•Cannot play a videofile properly on a PC.A video codec is needed to play the file recorded on your camcorder. Install orrun the built-in edit software (Intelli-studio).Make sure you insert the connector in the correct direction, and connect theUSB cable to the USB jack on your camcorder firmly.Disconnect the cable from the computer and camcorder, restart the computer.Reconnect it properly.Your computer may not have the necessary performance specifications toplayback a video file. Check the recommended computer specifications.••••Intelli-studio does notfunction properly.Exit the Intelli-studio application, and restart the Windows computer.Intelli-studio is not Macintosh compliant.Set “PC Software” to “On” in the Settings menu.According to your computer type, the Intelli-studio program may not runautomatically. In this case, open the desired CD-ROM drive that has the Intelli-studio program in My Computer and run iStudio.exe.••••The image or soundon your camcorderis not played on yourcomputer properly.Video playback or sound may stop temporarily depending on your computer.The video or sound copied to your computer is not affected.If your camcorder is connected to a computer that does not support Hi-speedUSB (USB2.0), the images or sound may not be played back correctly.The images and sound copied to your computer are not affected.••The playbackscreen is paused ordistorted.Check the system requirements to play a video. page 97Exit all other applications running on the current computer.If a recorded video is played on your camcorder when it is connected to acomputer, the image may not play smoothly, depending on the transfer speed.Please copy the file to your PC, and then play it back.•••Connecting/Dubbing with other devices (TV, DVD recorder, etc.)Symptom Explanation/SolutionYou cannot dubcorrectly using theAudio/Video cable.The Audio/Video cable is not connected properly. Make sure that the Audio/Video cable is connected to the proper jack, i.e. to the input jack of the deviceused for dubbing an image from your camcorder. page 95•troubleshooting