Samsung OfficeServ 7100 Installation Manual

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

OfficeServ 7100 INSTALLATIONTECHNICAL MANUAL PART 7 JULY 20107.5CONNECTING TO 16DLI2Connect a digital phone to the 16DLI2 card by using a twisted pair of AWG #24 or AWG #26 wires.P1-P16 PortsPin No. 1 2 3 4 5 6 7 8Function - - - DLI TIP DLI RING - - -Figure 7.7 RJ-45 Port of the 16DLI2 (For Digital Phone)CONNECTING TO 8COMBO/8COMBO2Connect a digital phone to the 8COMBO/8COMBO2 card by using a twisted pair of AWG #24 orAWG #26 wires.D1-D8 PortsPin No. 1 2 3 4 5 6 7 8Function - - - DLI TIP DLI RING - - -Figure 7.8 RJ-45 Port of the 8COMBO/8COMBO2 (For Digital Phone)7.1.4 Connecting an IP PhoneRefer to the ITP-5121D Keyset User Guide, ITP-5112L Keyset User Guide, ITP-5107S Keyset UserGuide, SMT-i3105 User Guide, SMT-i5210 User Guide, SMT-i5220 User Guide, SMT-i5230 UserGuide, and SMT-i5243 User Guide for information on connecting IP keysets.Note: If using the on-board MGI resources of the MP10/MP10a, you must activate the MGIlicense key in system programming to enable the specific number of MGI channels.P1-P16Port(RJ-45)D1~D8Port(RJ-45)CAUTION: The input power of the SMT-i Series phones needs 5.0vDC and 3000mA. TheSMT-i5210, SMT-i5220, SMT-i5230, and SMT-i5243 need to be powered by usingSamsung’s SMT-A53PW power adapter. The SMT-i3105 requires the SMT-A53PA poweradapter. Failure to use the appropriate power supply will cause permanent damage tothe phone and will void Samsung’s warranty.