Samsung NZ30K7570RS User Manual

Also see for NZ30K7570R SERIES: User manual User manual User manual

English 25OperationsUsing the smart connect featureThe cooktop has built in a Wi-Fi module that you can use to sync the cooktop withthe SmartThings app. On the smartphone app, you can:• monitor the operating status and the power level settings of the cooktopelements.• check and change the timer settings.Functions that can be operated from the SmartThings app may not work smoothlyif communication conditions are poor or the product is installed in a place with aweak Wi-Fi signal.How to connect the cooktopBefore you can use the remote features of your Samsung cooktop, you must pair itto the SmartThings app.1. Download and open the SmartThings app on your smart device.2. Follow the app’s instructions, and then touch and hold the Smart Connect keyfor 3 seconds.3. While the connection is being made, the LED indicator above the SmartConnect key blinks. Once the process is complete, the indicator glows withoutblinking. Now the cooktop is connected successfully.4. If the Smart Connect LED indicator does not turn on, follow the instruction inthe app to reconnect.NOTEFor further instructions, refer to the web manual at www.samsung.comWi-Fi On/Off• Touch the Smart Connect key to turn on or turn off the Wi-Fi connection.Using the hood control featureThis product features a Bluetooth device that you can use to connect the cooktopto Samsung hood control models. Through the Bluetooth connection, you can usethe hood control function on the SmartThings app.To find out more about Samsung hood control-enabled models, visit www.samsung.com.To connect to a hood control model1. Download and run the SmartThings app on your smartphone. Then, completethe Smart Connect procedure to connect to the cooktop.2. Follow the Bluetooth instructions of the hood control model and activate theBluetooth connection.3. Touch and hold the Smart Connect and Child lock buttons simultaneously tomake the Bluetooth connection. When the Bluetooth connection is sucessfullyestablished, appears on the display.4. Follow the instructions in the user manual of the hood control model and theApp guide to use the hood control.NOTE• If the Smart Connect connection is not successful, you cannot use theSmartThings app to monitor and control the hood.• Without a Smart Connect connection to the cooktop, you can use a Bluetoothconnection to pair the cooktop with the hood and sync them. To do this, followsteps 2 and 3 above.NZ30K7570R_DG68-00821B-04_EN+MES+CFR.indb 25 2018-03-09 12:04:18