5Initial Device SetupIf your device has never been powered on before and isinitializing for the first time, you will need to follow theseprocedures. These same steps are necessary if the device is everHard Reset (to factory default parameters).1. Touch the main Windows Mobile 6.1 screen to begin theinitialization process.2. Remove the Stylus from the side compartment (adjacent tothe Left Action key) (seen below).3. Use your stylus to calibrate the touch accuracy of thescreen by both accurately and firmly touching the center ofeach onscreen crosshair. Repeat this process for everycrosshair that appears until this step has successfullycompleted.Warning!: If your device has a touch-screen display, please note that atouch-screen responds best to a light touch from the pad of yourfinger or a non-metallic stylus. Using excessive force or a metallicobject when pressing on the touch-screen may damage thetempered glass surface and void the warranty. For moreinformation, refer to “Warranty Information” on page 145.Left Action keyStylusSWD-M100.book Page 5 Monday, March 8, 2010 8:09 AM
