Introduction 10Note: The device has been tested to support cards of up to 32GB. ThismicroSD card is an optional accessory, a card greater than 2GB isrecommended.Warning!: DO NOT remove a microSD card while files are being accessed ortransferred, as this can result in loss or damage of data.Caution!: Make sure your battery is fully charged before accessing/using themicroSD card. Accessed data may become damaged or unusable ifthe battery runs out while using the microSD card.Caution!: Ejection of the card is spring-loaded. As the microSD card is beingdischarged from the slot, be prepared to catch it and keep it fromfalling onto the floor.Installation of the microSD Card1. Locate the microSD card slot.2. Flip open the microSD card slot cover.3. With the gold contact pins facing downward, carefullyinsert the card into the opening and firmly push it in untilyou hear a click (indicating the card is securely installed).4. Once you are notified, touch Hide (from the bottom left ofthe screen) to acknowledge the card is properly insertedand ready to use.Important!: It is recommended you only use an optional microSD card of atleast 2GB (up to 16GB). Using non-recommended microSD cardscould cause data loss and damage your device.Incorrect CorrectMICMICSWD-M100.book Page 10 Monday, March 8, 2010 8:09 AM
