Samsung Mondi SWD-M100 User Manual

Also see for Mondi SWD-M100: Manual

Contents

117Adjusting Camera Settings1. Press and hold to activate the Camera mode.2. Touch to enter the camera settings pages.3. If not already open, tap to adjust the followingcamera settings:• Timer: allows you to set a time delay before the camera takes thephoto. Select the length of delay you want by touching Off,2 seconds, 5 seconds, and 10 seconds. When you press, the camera takes the photo after the specified timeelapses.• White balance: allows you to choose from the following: Auto,Daylight, Cloudy, Tungsten, or Fluorescent.• Effect: allows you to change the color tone or apply special effectsto your photos. Options include: None, B&W, Sepia, Aqua,Watercolor, or Negative.• ISO: allows you to adjust the ISO sensitivity of the camera imagingsensor. Selections are: Auto, 100, 200, or 400 speed.• Metering: allows you to set how the camera measures or metersthe light source: Center-weighted, Spot, or Matrix.• Quality: allows you to set the image quality to: High, Normal, orEconomy.• GPS: allows you to activate the GPS tracking feature which addsyour current location information to the image file’s propertiesinformation. This feature is enabled via the internal GPScomponents.Note: Touch the Up/Down arrows (right side of Camera settings page) toscroll down to additional entries such as Metering, Quality, and GPS.Adjusts the camera settings among two tabs:Camera and Settings. For more information, refer to“Adjusting Camera Settings” on page 117.Exits the current mode and returns you to thepreviously active page.Allows you to focus on the center of theviewfinder. Modes are Auto Focus, Macro, or OFF.Adjusts the image brightness level by eitherincreasing or decreasing the level.Launches the My Photos folder viewer whereyou can specify file-specific actions such astransfer via email/Bluetooth, deletion, file info, etc..SWD-M100.book Page 117 Monday, March 8, 2010 8:09 AM