Samsung LTE Mobile HotSpot PRO User Manual

Contents

40Admin Password Buttons• Apply: Select to save changes.• Reset: Select to discard changes made.Power ManagementOnce enabled, the HotSpot will disconnect from the datanetwork after a designated amount of time is reached.To save on battery life, the built-in wireless radio is turned offif the HotSpot is idle for the time duration specified in theHibernate field. When the LCD is on and the device is in Hibernatemode, press the WPS key to exit the Hibernate mode.– or –If the LCD is off and the device is in Hibernate mode,then pressing (Power) will turn the LCD on andturn Hibernate mode off and enable the radios.• Hibernate: Enables/disables the Standby feature. Select theadjacent filed to determine the amount of time that must be metbefore standby time is activated. Choose from: 15 minutes,30 minutes, 1 hour, 3 hours, or 6 hours.• If the device does go into Hibernte mode, confirm the HibernateOn icon ( ) appears and press the WPS key to exit the mode.Power Management Buttons• Apply: Select to update the settings and apply them.• Reset: Select to revert the settings to their previous values.Umounting SD CardThis process allows you to safely remove the card withoutdamaging any of the contents. A card must be properlyUnmounted before removal.Caution! If a card is pulled out of its internal slot without beingfirst properly unmounted, it can corrupt or damagethe card’s data.• Unmount: Properly disconnects the card from the device andallows you to safely remove it.Format SD CardThis process allows you to quickly erase all data found withinan optional microSD card.• Format: Quickly formats and erases all data currently on the SDcard.