20Installing the USB drivers for variousOS typesThere two separate types of drivers required for connectionto the device. These drivers can be found within the usbdriver folder on the HotSpot shown below.• Mac OS (requires the Escape drive)• Windows OS - (XP and Windows8 need RNDIS driver)Installation of the Escape Driver1. With the HotSpot not yet connected, locate the Mac ®version of the Samsung USB Driver for Mobile Phones(Escape) found on product page @ www.samsung.com .2. Run the installation package for the file named:ssud_v1.4.10_mac_for_rndis.dmg.zip.3. Select the disk where you would like the software to beinstalled and click Continue.Important! It is important that you select the disk running theOSX operating system. Choosing a different diskcan result in an installation failure.4. If prompted, enter your username and passwordinformation into the User Authentication window andclick OK.Important! If an installation failure occurs, unplug the device,reboot the machine, and rerun the installationprocedures above.5. Connect the HotSpot to the computer using the USBconnector (page 21).
