Samsung LC550-ZA User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

27English04 Advanced Featureshow to set up automaticallyTo set up the wireless connection automatically, follow thesesteps:1. Follow Steps 1 through 6 in the “How to set up usingPBC (WPS)”. (P. 26)2. Press the ▼ button to select Internet Protocol setup,and then press the EnTERE button. Press the ▲ or▼ button to select Auto, and then press the EnTEREbutton.3. Press the ▲ button to go to select a network, andthen press the EnTERE button. The network functionsearches for available wireless networks. When done, itdisplays a list of the available networks.4. In the list of networks, press the ▲ or ▼ button to selecta network, and then press the EnTERE button.If the AP is set to Hidden (Invisible), you have✎ to select Add network and enter the correctnetwork name (ssID) and security Key toestablish the connection.5. If the Security/PIN pop-up appears, go to Step 6. If theNetwork Connecting Screen appears, go to Step 10.6. Press the ▲ or ▼ button to select security or PIn. Formost home networks, you would select Security (forsecurity Key). The security Screen appears.7. On the security screen, enter your network’s PassPhrase.You should be able to find the Pass Phrase on✎ one of the set up screens you used to set up yourrouter or modem.8. To enter the Pass Phrase, follow these generaldirections:Press the number buttons on your remote to enter–numbers.Use the direction buttons on your remote to move–from button to button on the security Key screen.Press the Red button to change case or display–symbols/characters.To a enter letter or symbol, move to the letter or–symbol, and then press the EnTERE button.To delete the last letter or number you entered,–press the Green button on your remote.9. When done, press the Blue button on your remote. TheNetwork Connecting screen appears.10. Wait until the connection confirmation message isdisplayed, and then press the EnTERE button. Thenetwork setup screen re-appears.11. To test the connection, press the RETURn button toselect network Test, and then press the EnTEREbutton.network setup (Ad-hoc)You can connect to a mobile device without an access pointthrough the “Samsung Wireless LAN Adapter” by using apeer to peer network.how to connect to new Ad-hoc1. Follow Steps 1 through 6 in the “How to set up usingPBC(WPS)”. (P. 26)2. Choose select a network. A list of devices/networksappears.3. While in the device list, press the Blue button on theremote.The message✎ "Ad-hoc is a direct WI-Ficonnection with cellphone or PC. The existingnetwork system may have limited functionality.Do you want to change the networkconnection?" is displayed.4. Input the generated network name (ssID) andsecurity Key into the device you want to connect.how to connect an existing Ad-hoc device1. Follow Steps 1 through 6 in the “How to set up usingPBC(WPS)”. (P. 26)2. Choose select a network. Then, the device list will bedisplayed.3. Select the device you want in the Device list.4. If security key was applied, input the security key.If network does not operate normally, check✎ the network name (ssID) and security Keyagain. An incorrect security Key may cause amalfunction.A B C D E F GH I J K L M NO P Q R S T UV W X Y Z0~9Security Key0 enteredNumberLower caseB DeleteSpaceCSelect a networkn Move E Enter R Return