Samsung HT-FS6200/XU User Manual

Also see for HT-FS6200: User manual

English 17 |03 ConnectionsConnecting to a Network RouterYou can connect your product to your network routerusing one of the methods illustrated below.Wired NetworkBroadbandserviceBroadbandserviceBroadband modem(with integrated router)BroadbandmodemRouterOrHDMI OUT HDMI IN1 2LANPOWERAUX IN FM ANTOPTICALDIGITALAUDIO INLRSPEAKERS OUTSUBWOOFERFRONT LFRONT R,03('$1&(| NOTES | Your router or your Internet Service Provider's policiesmay prevent the product from accessing Samsung'ssoftware update server. If this occurs, contact yourInternet Service Provider (ISP) for more information. DSL users, please use a router to make a networkconnection. To use the AllShare function, you must connect yourPC to your network as shown in the illustrations on theabove.The connection can be wired or wireless.Wireless NetworkBroadbandserviceWireless IP sharer| NOTES | If your wireless IP router supports DHCP, this productcan use a DHCP or static IP address to connect to thewireless network. Set your wireless IP router to Infrastructure mode. Ad-hoc mode is not supported. The product supports only the following wirelesssecurity key protocols:- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),WPA2-PSK (TKIP/AES) Select a channel on the wireless IP router that is notcurrently being used. If the channel set for the wirelessIP router is currently being used by another devicenearby, it will result in interference and communicationfailure. In compliance with the newest Wi-Fi certificationspecifications, Samsung home theaters do notsupport WEP, TKIP, or TKIP-AES (WPS2 Mixed)security encryption in networks running in the 802.11nmode. Wireless LAN, by its nature, may cause interference,depending on the operating conditions (APperformance, distance, obstacles, interference byother radio devices, etc).