Samsung HT-FS6200/XU User Manual

Also see for HT-FS6200: User manual

| 16 EnglishConnectionsConnecting to TV/External DevicesHDMI OUT HDMI IN1 2LANPOWERAUX IN FM ANTOPTICALDIGITALAUDIO INLRSPEAKERS OUTSUBWOOFERFRONT LFRONT R,03('$1&(HDMI OUT HDMI IN1 2LANAUX IN FM ANTOPTICALDIGITALAUDIO INLROPTICAL OUTAUDIO OUTHDMI OUTHDMI INMethod 1 Method 2 Method 3R RedW WhiteExternal DevicesConnecting to a TVConnect an HDMI Cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on yourTV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote controland select HDMI as the external source of the TV.Connecting to External DevicesTo select the correct mode for an external device, press the FUNCTION button. Each time you press the button, themode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BTMethod 1 HDMI IN : Connecting to an External Component with an HDMI CableConnect an HDMI Cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on yourdigital device.  Select the HDMI1 or HDMI2 mode.Method 2 AUX IN : Connecting an External Analogue ComponentUsing a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on theexternal analogue component.  Select the AUX mode.• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.Method 3 OPTICAL : Connecting an External Digital Audio ComponentTo connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the DigitalOptical Out jack of the external digital device. Select the D. IN mode.| NOTES | To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV. This system supports Digital sampling frequencies of 32 kHz or higher from external digital components. This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.