Using Auto Backup to send videos or photos79Wireless network (HMX-QF20 only)Setting the PC to wake up from sleep mode1 Click Start, and then open the Control Panel.2 Configure the network connection.Windows 7:Click Network and Internet p Network and Sharing Centerp Change adapter settings.Windows Vista:Click Network and Internet p Network and Sharing Centerp Manage network connections.Windows XP:Click Network and Internet Connection p NetworkConnection.3 Right click Local Area, and then click Properties.4 Click Configure p the Power manage tab p Allow thisdevice to wake the computer.5 Click OK.6 Restart the PC.•••Setting the PC to turn on1 Turn on the PC and press F2 while the PC is booting.The BIOS setting menu will appear.2 Select Advanced tab p Power management Setup.3 Select Resume on PME p Enabled.4 Press F10 to save your changes and continue booting.5 Click Start, and then open the Control Panel.6 Configure the network connection.Windows 7:Click Network and Internet p Network and Sharing Centerp Change adapter settings.Windows Vista:Click Network and Internet p Network and Sharing Centerp Manage network connections.Windows XP:Click Network and Internet Connection p NetworkConnection.••••About the Wakeup on LAN (WOL) featureWOL (Wakeup on LAN)WOL is a technology that allows you to turn on a PC from another location over a network connection or the Internet or to set a PC to wake up from sleepmode. With the WOL feature, you can automatically turn on or wake up a PC with your camcorder by touching Auto Backup.
