Maintenance122AppendixesLCD screenTo prolong its service life, do not rub the LCD screen with a coarsecloth.Be aware of the following LCD screen phenomena. They are notmalfunctions.- When you use the camcorder, the surface around the LCDscreen may heat up.- If you leave the power on for a long time, the surface around theLCD screen becomes hot.- When using the camcorder in cold conditions, an afterimagemay appear on the LCD screen.An LCD screen is manufactured using advanced technologywhich creates screens with pixel failure rates of less than 0.01%.However, a black or bright spot (red, blue, white) may appear in thecenter of the LCD screen and up to two spots may appear outsidethe center. These spots, which are normally incurred during themanufacturing process, do not affect the recorded images.•••When there is dew condensation, put the camcorder asidefor a while before usingWhat is dew condensation?Dew condensation happens when a camcorder is moved to alocation where there is a significant temperature difference from theprevious location. The dew condenses on the external or internalparts of the camcorder, and on the reflection lens. If there is dew onor in your camcorder, it may cause the camcorder to malfunction ordamage the camcorder when you turn the power on.Exactly when does dew condensation occur?When you move the camcorder to a location with a highertemperature than the previous location, or when you move it to a hotarea suddenly. Examples:- You record outside in cold weather during the winter and thenmove the camcorder in indoors.- You record outside in hot weather after being indoors or inside acar where the A/C was running.What can I do?- Turn the power off, detach the battery, and leave the camcorder ina dry area for 1~2 hours before using it.•••Use the camcorder only after dew condensation has completelydisappeared.Be sure to use the recommended accessories supplied with thecamcorder. For service, contact your nearest Samsung authorizedservice center.••