TroubleshootingTroubleshootingEnglish40Problem ActionItems still wrinkledafter WRINKLEPREVENT(WRINKLE-CARE,WRINKLE RELEASE).• Small loads of 1 to 4 items work best.• Load fewer items. Load similar-type items.• Take out the items immediately after drying is complete.Water drips from thenozzle when STEAMCARE starts.• This is steam condensation. The dripping water will stop aftera short time.Sprayed water is notvisible during STEAMCARE.• Sprayed water is difficult to see when the door is closed.Extended time.• Sensor Dry automatically senses the moisture in the loadand shuts the dryer off when the selected dryness level isreached.The drying time can change according to the type andamount of laundry. See the cycle chart for reference.If a problem persists, contact a local Samsung service center.DV7450M-03170Z-00_EN.indd 40 2017-01-25 11:24:24