EnglishMaintenanceEnglish46CAUTION• Clean the lint filter after each load. Otherwise, the drying performance may decrease.• If the filter surface is wet, allow it to completely dry before use.- Inserting the filter while it is wet can cause mold and/or odor to form and/or result in less drying.• When cleaning or removing the lint filter, do not shake or tap on the filter. Doing so can damage thefilter.• Opening the outer and inner filters carelessly and with excessive force can damage the filters.Heat exchangerWhen it is time to clean the heat exchanger, the dryer will alert you by displaying the “Clean heatexchanger” message.A dirty heat exchanger will hinder the product’s performance and should be cleaned regularly.NOTE• Water droplets can form around the heat exchanger due to condensation caused by a temperaturedifference. This is normal and is not a sign of a leak.• If you are not planning on using the dryer for a long period of time, open the heat exchanger cover andventilate.A1. Gently press the top part of the outer cover (A) toopen.BB2. Unlock the inner cover fixers (B), and then pull theinner cover to remove.U-PJT_DRYER_SimpleUX_WEB_DC68-04169H-02_AU_English.indd 46 2021/11/3 17:33:44