EnglishEnglish 17STEP 2 Adjust the levelling feetBA1. Gently slide the dryer into the desired location.2. Use a level (A) and check the levelness of the dryerfrom side to side and front to back.3. If the dryer is not level, turn the levelling feet (B)left or right to adjust the height.4. Once the dryer is level, make sure the dryer standsfirmly on the floor.5. Plug in the dryer.C DNOTE• To set the dryer to the same height as the washingmachine, turn the levelling feet to the right untilit fully retracts (C). Then, turn the levelling feetto the left to extend (D) it until the dryer and thewashing machine are the same height.• Extend the levelling leg only as much as necessary.Extending the levelling leg more than necessarycan cause the dryer to vibrate.U-PJT_DRYER_SimpleUX_WEB_DC68-04169H-02_AU_English.indd 17 2021/11/3 17:33:34