ŝ57Ş[ Selecting Video out type ]ƈ The Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.)to which the camera is connected. PAL mode can support only BDGHI.ƈ Connecting to an external monitorƃ Using the USB cable with Cradle (Optional) :Connect the camera and the cradle. Connect thecradle to an external monitor with the supplied AVcable.ƃ Using the AV cable with Camera : Connect thecamera to an external monitor with the supplied AVcable.Yellow - VideoWhite - soundSetup menuSETUPSoundUSBAF LampLCDVideo OutBack: Set:OKNTSCPAL[Using the AV cable with Cradle][Using the AV cable with Camera]- NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.- PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,Sweden, Switzerland, Thailand, Norway.- When using a TV as an external monitor, you will need to select the external orAV channel of the TV.- There will be a digital noise on the external monitor, but it is not a malfunction.- If the image is not in the centre of the screen, use the TV controls to centre it.- When the camera is connected to an external monitor, the menu will be visibleon the external monitor and the menu functions are the same as thoseindicated on the LCD monitor.- When selecting the PAL video out type, the TV monitor turns off and the LCDmonitor of the camera turns on when you record a movie. After completing therecording, the TV monitor turns on and the LCD monitor of the camera turns off.[ Quick view ]ƈ If you enable Quick View before capturing an image, you can view the imageyou just captured on the LCD monitor for the duration set in the [Quick View]setup. Quick view is possible only with still images.ƃ Sub menus[Off] : The quick view function can’t beactivated.[0.5, 1, 3 sec] : The captured image is brieflydisplayed during the selected time.SETUPUSBAF LampLCDVideo OutQuick ViewBack: Set:OKOff0.5 sec1 sec3 sec