Samsung DIGIMAX S600 User Manual

Contents

ŝ30Ş+ / - buttonƃ Using the Custom White BalanceWhite balance settings may vary slightly depending on the shootingenvironment.You can select the most appropriate white balance setting for a given shootingenvironment by setting up the custom white balance.ƈ Exposure compensation : This camera automatically adjusts the exposureaccording to the ambient lighting conditions.You can also select the exposure value by using the+ / - button.3. Press the + / - button again. The value you set will be saved and the ExposureCompensation setup mode will close.If you change the exposure value, the exposure indicator ( ) will bedisplayed on the bottom of the LCD monitor.ſ A negative exposure compensation value reduces the exposure.Note that a positive exposure compensation value increases the exposureand the LCD monitor will appear white or you may not get good pictures.1. Select the CUSTOM ( ) menu of theWhite Balance.2. Place a sheet of white paper in front of thecamera so that the LCD monitor shows onlywhite, and then press the SHUTTER button.3. Your custom white balance value is stored.- The custom white balance value will beapplied, starting with the next picture youtake.- The user configured white balance will beremain effective until it is overwritten.[ White paper ]ƃ Compensating Exposure1. Press the + / - button, and then use the UP andDOWN buttons to select the exposurecompensation icon ( ).The exposure compensation menu bar willappear as shown.2. Use the LEFT and RIGHT buttons to set thedesired exposure compensation factor.Measure:Shutter