ŝ52ŞPictBridge : Printing Setup menuPictBridge : Reset1. Use the LEFT and RIGHT buttons to select the[RESET] menu tab.2. Use the UP and DOWN buttons to select thedesired sub menu value, and then press the OKbutton.If [No] is selected : Settings will not be reset.If [Yes] is selected : All print and image settings willbe reset.ſ Default print setting varies depending on the printer manufacturer.For your printer’s default setting, refer to the user’s guide that came with yourprinter.RESETNoYesExit:MENU Move:ƈ DPOF Print : This allows you to directly print the files with DPOF information.ƈ Initialises user-changed configurations.1. Use the LEFT and RIGHT buttons to select the[DPOF PRINT] menu tab.2. Use the UP and DOWN buttons to select thedesired sub menu value, and then press theOK button.[No] : Cancel the printing[Yes] : Directly print the file with the DPOFinformationſ Depending on the manufacturer and printer model, some menus may not beavailable.When a printer does not support DPOF, the menu is still displayed but notavailable.DPOF PRINTNoYesExit:MENU Move:Menu tab Main menu Sub menu Secondary menu PageSeries -Reset -Off, 1, 3, 5, 10 min - p.54No -Yes -06/01/01 13:00 -yy/mm/dd -dd/mm/yy -mm/dd/yy -Off -Off -Date -Date&Time -Off -Low -Medium -High -ENGLISH FRANÇAISDEUTSCH ESPAÑOL ITALIANOP”CCK»… PORTUGUÊS DUTCHDANSK SVENSKA SUOMIBAHASAPOLSKI Magyar- -FilePower OffLanguageFormatDate&TimeImprintSoundp.53p.54p.55p.56p.55p.55ƈIn this mode, you can set up basic settings. You can use the setup menu in allcamera modes, except Voice Recording mode.The items indicated by are default settings.