Samsung BN68-02756B-04 User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

14 EnglishBasic FeaturesPicture MenuChanging the Preset Picture Mode¦MEnUO m → Picture → Mode → EnTEREModeSelect your preferred picture type bypressing the P.MODE button.Dynamic■ : Suitable for a bright room.standard■ : Suitable for a normalenvironment.natural■ : Suitable for an eye comfortable display.natural✎ is not available in PC mode.Movie■ : Suitable for watching movies in a dark room.Adjusting picture settings¦MEnUO m → Picture → Backlight → EnTEREBacklight / Contrast / Brightness /sharpness / Color / Tint (g/R)Your television has several setting options for picture qualitycontrol.nOTE✎When you make changes tox Backlight, Contrast,Brightness, sharpness, Color or Tint (g/R), theOSD will be adjusted accordingly.In PC mode, you can only make changes tox Backlight, Contrast and Brightness.Settings can be adjusted and stored for eachx external device connected to the TV.Lowering picture brightness reduces powerx consumption.Economical solutions¦ECO solutionMEnUO m → Picture → ECO solution → EnTEREEnergy saving (Off / low / Medium / high /■Picture Off / Auto): This adjust the brightness of theTV in order to reduce power consumption. If you selectPicture Off, the screen is turned off, but the soundremains on. Press any button to turn on the screenagain.Eco sensor (Off / On)■ :To enhance your power savings; the picture settings willautomatically adapt to the light in the room.If you adjust the✎ Backlight, the Eco sensor willbe set to Off.Min Backlight: When ECO sensor is On, the minimumscreen brightness can be adjusted manually.If✎ Eco sensor is On, the display brightness maychange (become slightly darker in most cases)depending on the surrounding light intensity.no signal Power Off (Off / 15 min. / 30 min. / 60 min.)■ :Sets how quickly the TV switches to standby mode, if nopicture is being received.Disabled when the PC is in power saving mode.✎setting up the TV with your PC¦Set the input source to PC.Auto Adjustment tMEnUO m → Picture → Auto Adjustment →EnTEREAdjust frequency values/positions and fine tune the settingsautomatically.Not available when connecting through HDMI/DVI✎ cable.screenCoarse / Fine■ : Removes or reduces picture noise. If thenoise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjustthe picture so that it is aligned to the center of screen.Position■ : Adjust the PC’s screen positioning if it doesnot fit the TV screen. Press the ▲ or ▼ button to adjustthe Vertical-Position. Press the ◄ or ► button to adjustthe Horizontal-Position.Image Reset■ : Resets the image to default settings.Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP)Depending on the version of Windows and the video card,the actual screens on your PC will probably look different, butthe same basic set-up information will apply in most cases.(If not, contact your computer manufacturer or SamsungDealer.)1. Click on “Control Panel” on the Windows start menu.2. Click on “Appearance and Themes” in the “ControlPanel” window and a display dialog-box will appear.3. Click on “Display” and a display dialog box will appear.4. Navigate to the “Settings” tab on the display dialog-box.The correct size setting (resolution)y[Optimum: 1360 X 768 pixels]If a vertical-frequency option exists on your displayysettings dialog box, the correct value is ‘60’ or ‘60 Hz’.Otherwise, just click ‘OK’ and exit the dialog box.PPOWERFAV.CHCHLISTMEDIA.PP.MODES.MODEP.SIZECCMTSINFOSLEEPTOOLS