Samsung AA68-03265A-00 Owner's Instructions Manual

Contents

CHAPTER TWO : INSTALLATION 2.2Connecting Cable TVTo connect to a cable TV system, follow the instructions below.Cable without a Cable Box▼1Plug the incoming cableinto the VHF/UHFantenna terminal on backof the TV.Because this TV is cable-ready,you do not need a cable box to viewunscrambled cable channels.2Plug the combiner intothe VHF/UHF terminalon the bottom of therear panel.I N S TA L L AT I O NSeparate VHF and UHF AntennasIf you have two separate antennas for your TV (one VHF and one UHF), you mustcombine the two antenna signals before connecting the antennas to the TV. Thisprocedure requires a an optional combiner-adaptor (available at most electronics shops).1Connect both antennaleads to the combiner.Connecting to a Cable Box that Descrambles All Channels▼1Find the cable that isconnected to theANTENNA OUT terminalon your cable box.This terminal might be labeled“ANT OUT,” “VHF OUT,” or simply,“OUT.”2Connect the other endof this cable to theVHF/UHF antennaterminal on the back ofthe TV.03233A(E)-CHAPTER 2 11/28/03 1:34 PM Page 2