Samsung 5 series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

Contents

English - Placing Your Television in Standby ModeYour set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when youwish to interrupt viewing temporarily (during a meal, for example).1. Press the POWERP button on the remote control.The screen is turned off and a standby indicator appears on your set.2. To switch your set back on, simply press the POWERP button again.Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best tounplug the set from the mains and aerial.Plug & Play FeatureWhen the TV is initially powered on, basic settings proceed automatically and subsequently.1. Press the POWER button on the remote control. The message You can set the menulanguage. is displayed.2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTEREbutton to confirm your choice.3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTERE button.We recommend setting the TV to Home Use mode for the best picture in your home environment.Store Demo mode is only intended for use in retail environments.If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volumebutton on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.4. Press the ENTERE button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTERE button toconfirm your choice.5. Press the ▲ or ▼ button to select Air or Cable, then press the ENTERE button.Air: Air antenna signal.Cable: Cable antenna signal.6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTERE button to select Start.Digital & Analogue: Digital and Analogue channels.Digital: Digital channels.Analogue: Analogue channels.When setting the antenna source to Cable, a step appears allowing you to set a value for the digital channel search. Formore information, refer to Channel → Auto Store.The channel search will start and end automatically.Press the ENTERE button at any time to interrupt the memorization process.After all the available channels are stored, the message Set the Clock Mode. is displayed.. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button.If you select Manual, Set current date and time is displayed.If you have received a digital signal, the time will be set automatically. If not, select Manual to set the clock. (refer to page19)8. The connection method to provide the best quality HD is offered. After confirming the method, press the ENTERE button.9. The message Enjoy your TV! is displayed. When you have finished, press the ENTERE button.If you want to reset this feature...1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.2. Press the ENTERE button again to select Plug & Play.3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.If you want to change PIN number, use the Change PIN function. (refer to page 21)The Plug & Play feature is only available in the TV mode.¦NN¦NNNNNNNNNNNNNPlug & PlayYou can set the menu language.Menu Language : English ►E Enter